28
MAINTENANCE
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from
various types of commercial solvents and may be damaged by their use. Use clean cloths to
remove dirt, dust, lubricant, grease, etc., rmly to maintain control.
LUBRICATION
All of the bearings in this product are lubricated with a sufcient amount of high grade lubricant
for the life of the unit under normal operating conditions. Therefore, no further lubrication is
required.
REPLACING THE GUIDE BAR AND CHAIN
DANGER
Never start the motor before installing the guide bar, chain, chain cover, and chain cover lock nuts.
Without all these parts in place, the clutch can y off or explode, exposing the user to possible
serious injury.
WARNING
To avoid serious personal injury, read and understand all the safety instructions in this section.
WARNING
Before performing any maintenance, make sure the battery is removed. Failure to heed this
warning could result in serious personal injury.
CAUTION
Always wear gloves when handling the bar and chain; these components are sharp and may
contain burrs.
To Next Page
Loading...
Need help?
General
