English
4.Add the device
2. Tap “+” and select “ Compatible Pairing Mode ” on APP.
If you fail to enter Bluetooth Pairing Mode, please try “Compatible Pairing Mode ”
to pair.
Compatible Pairing Mode
1. Press the light switch 5 times repeatedly at an interval of every 1s (Off-ON-Off-ON-
Off-ON-Off-ON-Off-ON) when the light is on. The "quick flash" indicates the device
enters the compatible pairing mode.
Usage of being an ordinary bulb
Power on the bulb, it will enter quick pairing mode (The bulb change from bright to
dim and cycle the mode), after 10s, if power off, it will go solid and keep warm light
at the highest brightness.
Sou nd Pairi ng
Availa ble for e WeLin k suppo rt devi ces
Availa ble for G SM
and oth er devi ces
with QR code.
Available for camera
and other devices that
support this pairing
method.
Add D evice
All dev ices
Qui ck Pair ing
Sca n QR code
Ava ila ble f or bl uet oot h
connection.
Bluetooth Pairing
Tap “+” and select “Bluetooth Pairing”, then operate following the prompt on the app.
For Android system:
Enter Wi-Fi password and tap “Next”. Be patient until pairing completes.
For iOS system:
S elect Wi-Fi S SID w ith Enter Wi-Fi password , tap “Next” and then “Connect ”.
ITEAD-****** and enter the password 12345678, and then go back to eWeLink
app and tap “Next”. Be patient until pairing completes.
Shenzhen Sonoff Technologies Co., Ltd.
8
To Next Page
Loading...
Need help?
General
