Compatible Pairing Mode
If you fail to enter Quick Pairing Mode (Touch), please try “Compatible Pairing Mode ”
to pair.
Long press Pairing button for 5s until the Wi-Fi LED indicator changes in a cycle
of two short flashes and one long flash and release. Long press Pairing button
for 5s again until the Wi-Fi LED indicator flashes quickly. Then, the device enters
Compatible Pairing Mode.
Tap “+” and select “ Compatible Pairing Mode ” on APP.
Select Wi-Fi SSID with ITEAD-****** and enter the password 12345678, and then
go back to eWeLink APP and tap “Next”. Be patient until pairing completes.
Specifications
Product Introduction
Pairing button
Manual switch
Wi-Fi LED indicator(Blue)
On/off LED indicator
Sensor port
Wire Fastener Cover
The device weight is less than 1 kg.
The installation height of less than 2 m is recommended.
To Next Page
Loading...
Need help?
General
