Sonoff ZBMINI User Manual

SONOFF ZigBee Bridge supports connecting
multiple sub-devices at the same time.
Conne ct ing
Kee p the d evice close
eno ugh to the hu b.
Add Devic e
Loo king f or dev ice
3 devices Found
>
ZBB ridge
Add ed:0
No c hild d evice ,plea se add .
Add
Power the Bridge on, set the sub-device to the pairing mode. Then access the Bridge
page in the eWeLink APP to tap “Add”, and be patient until the pairing completes.
SONOFF TECHNOLOGIES CO., LTD.
English
More APP application platforms and gateway
recommendations
Gateway adding instruction:
1. Refer to the gateway user manual to download the matched APP and get it paired.
2. Set ZBMINI to the pairing mode.
3. Add ZBMINI according to the prompt of APP. Please select eWeLink or SONOFF
when adding.
If the addition failed, move the sub-device closer to the Bridge and try again.
10
This device supports the following gateways besides SONOFF ZigBee:
Echo Studio
Echo Plus (model: ZE39KL)
2nd Gen Echo Show (model: DW84JL)
2nd Gen Echo Plus (model: L9D29R)
Samsung SmartThings hub
Amazon Alexa
SmartThings
Hue
Philips Hue Smart Hub
Echo (4th Gen)
15s

Sonoff ZBMINI Specifications

General

Product color	White
Housing material	Polycarbonate (PC)
Remotely operated	Yes
Operating frequency	2400 MHz
Placement supported	Indoor
Wireless technology	ZigBee
Connectivity technology	Wired & Wireless
Maximum power per channel	2200 W
Sustainability certificates	CE, RoHS
Operating temperature (T-T)	-10 - 40 °C
Operating relative humidity (H-H)	5 - 95 %
Quantity per pack	1 pc(s)
Power source	AC
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz

Weight and Dimensions

Width	42.6 mm
Height	20 mm
Weight	36 g