Sony alpha 3000 User Manual

GB
18
Preparing the camera
Attaching/removing the lens
Set the power switch of the camera to OFF before you attach or remove the
lens.
• When attaching a lens, do not press the lens release button.
• Do not use excessive force when attaching a lens.
• The Mount Adaptor (sold separately) is required to use an A-mount lens (sold
separately). For details, refer to the operating manual supplied with the Mount
Adaptor.
• When using a lens equipped with a tripod socket, attach the socket on the lens side
to the tripod to maintain balance.
1
If the cap or the packaging lid
is attached, remove it from the
camera or the lens.
• Quickly change the lens somewhere
away from dusty locations so as to
prevent dust or debris from entering
the camera.
2
Mount the lens by aligning the
white index marks on the lens
and the camera.
• Hold the camera’s face downward
to prevent the dust from entering
into the camera.
3
While pushing the lens lightly
toward the camera, turn the
lens clockwise until it clicks
into the locked position.
• Be sure to put the lens on straight.
Notes

Sony alpha 3000 Specifications

General

Camera Type	Mirrorless
Sensor Type	APS-C CMOS
Effective Pixels	20.1 MP
ISO Range	100-16000
Lens Mount	Sony E-mount
Viewfinder Type	Electronic
Screen Size	3.0 inches
Screen Resolution	230, 400 dots
Continuous Shooting	3.5 fps
Storage Media	SD/SDHC/SDXC, Memory Stick PRO Duo/Pro-HG Duo
Battery Type	NP-FW50
Max Video Resolution	Full HD 1920 x 1080
Shutter Speed	1/4000 sec - 30 sec
Weight	411 g (with battery and memory card)
Dimensions	128 x 90.9 x 84.5 mm
Battery Life	Approx. 470 shots