Sony BM10 User Manual

Pairing and connecting
Before you can use your music receiver to play music through a stereo system, you
need to first pair the music receiver with your phone. You can pair the devices
manually, or you can use NFC. Once paired, the music receiver automatically
establishes a connection to your phone.
The internal memory of your music receiver can save and remember up to eight
pairings with other phones at any given time.
To manually pair the music receiver with your phone
1
Make sure your phone has the Bluetooth® function turned on.
2
Music Receiver: If you are pairing the music receiver with a phone for the first
time, the music receiver enters pairing mode automatically. If not, press and
hold the Pair/Connect button until the notification light flashes blue.
3
Phone: Scan for Bluetooth® devices, then select BM10 in the available
devices list.
4
Follow the pairing instructions that appear on your phone. If a PIN code is
required, enter "0000".
To pair the music receiver with a phone using NFC
1
Make sure that the phone has the NFC function turned on and that the screen
is active and unlocked.
2
Place the phone over the music receiver so that the NFC detection area of
each device touches the other.
5
This is an Internet version of this publication. © Print only for private use.

Sony BM10 Specifications

General

Receiver type	stereo
Audio output channels	- channels
Power output per channel (20-20KHz@8 Ohm)	- W
HDMI in	0
USB ports quantity	1
Connectivity technology	Wired & Wireless
Speakers connectivity type	RCA
Bluetooth	Yes
Ethernet LAN	No
Bluetooth version	3.0+HS
Bluetooth profiles	A2DP
Supported radio bands	Not supported
Display	-
Product color	Black
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.