D:\SONY TV\SY140104_Clover 67 (Rev-1)\4533569121_US\US03STU.fm
XBR-70X850B / 65X850B / 55X850B / 49X850B / KDL-70X830B / 65X830B / 55X830B
4-533-569-12(1)
10
US
• Ensure that there are no objects in front
of the TV.
1: Attaching the
Table-Top Stand
x Recommended (edge position)
(except XBR-70X850B,
KDL-70X830B)
Refer to the supplied Table-Top Stand
leaflet for proper attachment.
~
• Do not put stress on the LCD panel or the
frame around the screen.
• Be careful to not pinch your hands or the AC
power cord when you install the TV set to the
Table-Top Stand.
• Two or more people are needed to carry out
this installation.
• Be sure to store the unused stand covers in a
safe place. Keep them away from small
children.
1 Remove the cushion of the right side 1,
and attach the Table-Top Stand to the TV
2. Fix the TV to the Table-Top Stand
using the supplied screws. The arrow
marks indicate the location of the
screw holes used for securing the Table-
Top Stand.
IR Sensor
3D Sync
Transmitter
(XBR-70X850B,
KDL-70X830B
only)
To Next Page
Loading...
Need help?
General
