C:\Users\CHAILING_2\Desktop\FS\UCM\US\5037357111_US.fm master page: Left
XR-77A80K / 77A80CK / 65A80K / 65A80CK / 55A80K / 55A80CK
5-037-357-11(1)
6
US
Precautions to Protect the Screen from
Damage
Image retention
OLED TV’s are susceptible to image retention (burn-in) due
to the characteristics of the materials used. Image retention
may occur if images are displayed in the same location on
the screen repeatedly or over extended periods of time.
This is not a malfunction of the TV. Avoid displaying images
that may cause image retention.
The following are examples of images that
may cause image retention:
• Content with black bars either on the top and bottom
and/or the left and right sides of the screen. (for example,
Letterboxed, 4:3 screen, Standard definition)
• Static images such as photos.
• On-screen menus, program guides, channel logos etc.
• Static content from applications.
• On-screen tickers, such as those used for news and
headlines.
To reduce the risk of image retention:
• Sony recommends that you turn off the TV normally by
pressing the power button on the remote control or the
TV.
• Fill the screen by changing [Wide mode] to eliminate the
black bars. Select [Wide mode] other than [Normal].
• Turn off the OSD (On Screen Display) by pressing
(Control menu) button and select [Info], and turn off
the menus from connected equipment.
• Avoid displaying static images with bright colors
(including white), clocks or logos on any portion of the
screen.
• Set the picture settings based on the ambient conditions.
The Standard Picture is recommended for home use and
when viewing content that often displays the station
logos, etc.
The TV has following features to help reduce/prevent
image retention.
Panel refresh
A panel refresh will adjust the panel uniformity. Panel
refresh can be performed and should only be used when
image retention is very noticeable.
Caution:
• The Panel refresh function may affect the panel. Do not
perform Panel refresh more than once a year as it may
affect the usable life of the panel.
• Panel refresh takes about ten minutes to complete.
• The effectiveness of a panel refresh may vary depending
on the image retention condition.
Pixel shift
Automatically moves the image on the screen to prevent
image retention.
Other feature
The screen brightness is automatically reduced when
displaying still images, clocks, bright colors or logos etc.
Using TV as Part of Audio
System
Note
• Before connecting cables, disconnect the AC
power cord of both TV and AV receiver.
• Refer to the instruction manual of the Audio
system with S-CENTER OUT terminal for detail.
Protecting the TV Screen (OLED TV)
S-CENTER
OUT
HDMI
(eARC/ARC)
connection
TV center
speaker
mode
cable
To Next Page
Loading...
Need help?
General