19
Chapter 1 Overview
Aperture modification frequency for each signal format
Signal format
Serial digital input Analog input
SDI HD SDI
Composite Component
GBR
(Y/C) (YPBPR)
575/50I 5 MHz 5 MHz 5 MHz**
480/60I 5 MHz 5 MHz 5 MHz**
1080/48I 25 MHz** 25 MHz 25 MHz
1080/50I 25 MHz** 25 MHz 25 MHz
575/50P 25 MHz 25 MHz
480/60P 25 MHz 25 MHz
1035/60I 25 MHz 25 MHz 25 MHz
1080/60I 25 MHz 25 MHz 25 MHz
720/60P 25 MHz** 25 MHz 25 MHz
An empty frame in the table means that the signal cannot be input or the aperture modification can not operate
for that signal even if it is input.
*
The aperture modification frequency is 25 MHz when the signal is input via the analog input/output connectors (equipped
as standard).
**
The BKM-41HD and BKM-42HD with the serial number 2100001 to 2110000 cannot receive the HD SDI signal of the
1080/48I, 1080/50I or 720/60P format. To receive all of the above signal formats, use the BKM-41HD and BKM-42HD
with a serial number from 2600001 to 2610001.
To Next Page
Loading...
Need help?
General