Sony CDP-C211 User Manual

| olor: }dlave mm cal-mecelelel=s-) au ole) a dreamed
1 dal =Wme| [Yomi ax :t-] @tel-t-]ae18)
The unit will scan a disc from beginning to end and
determine the loudest portion (peak level) of the disc, and
then play that portion repeatedly. This function will make it
easier for you to adjust to the optimum level when
recording on tape. You can use this function in the
continuous, shuffle and program play modes.
To set peak search
Press PEAK SEARCH in the stop mode. “PEAK” flashes
in the window. The entire tracks in a disc or program will
be searched automatically. “PEAK” lights up and the
toudest portion will be played repeatedly for 4 seconds.
. Adjust the recording level on your tape deck according to
the peak level.
To start play immediately
Press >.
To stop peak search
Press @.
Press &f to pause at the first selection.
Note on peak search function
The unit determines the loudest portion (peak level) of a disc
by searching it at fixed intervals. As a result, the portion
searched may differ from the actual peak level. In addition, this
function may determine different portions as the peak level for
the same disc. However, the difference between the portion
searched and the actual peak level is insignificant and will not
present any problem in adjusting the recording level.
18

Sony CDP-C211 Specifications

General

Brand	Sony
Model	CDP-C211
Category	CD Player
Language	English