7
EN
model name1[CECH-3001A/CECH-3001B]
[4-291-560-11(1)]
masterpage:Right
filename[I:\#Sagyou\#04\0422\4291560111\4291560111CECH3001AUC\01US\01EN
02XXX.fm]
• Do not cover with cloth.
• Do not allow dust to build up on the vents.
AC power cord use
• Any TV or component connected to the system must be
functioning properly and free of defects. If a TV or component is
faulty or defective, it may cause damage to the TV or component,
or to the system itself. As with all electrical products, connection
to faulty or defective components, or the failure to connect to a
properly wired outlet, may cause sparking and pose a fire hazard.
• Do not plug the AC power cord for the system into an electrical
outlet until you have made all other connections. Make sure the TV
or other component is unplugged from the electrical outlet prior to
connecting it to the system.
• To help ensure safe operation, regularly inspect the AC power
cord. If damaged, stop use immediately and contact SCEA
Consumer Services ( back cover).
• Do not use a power cord other than the supplied AC power cord.
Do not modify the cord.
• Do not touch the plug of the AC power cord with wet hands.
• Protect the AC power cord from being walked on or pinched
particularly at plugs, expansion receptacles and the point where
the cord exits from the system.
• Do not place heavy items on the cord.
• Do not place the AC power cord near heating equipment and do
not expose the cord to heat.
• Unplug the AC power cord from the electrical outlet before
cleaning or moving the system, or when you do not intend to use
the system for an extended period of time. When disconnecting,
grasp the power cord by the plug and pull straight out of the
electrical outlet. Never pull by the cord and do not pull out at an
angle.
• Do not connect the AC power cord to a voltage transformer or
inverter. Connecting the AC power cord to a voltage transformer
for overseas travel or an inverter for use in an automobile may
cause heat to build up in the system and may cause burns or a
malfunction.
Never disassemble or modify the system or
accessories
Use the PS3
™
system and accessories according to the instructions
in the product documentation. No authorization for the analysis or
modification of the system or accessories, or the analysis and use of
its circuit configurations, is provided. Unauthorized modification of
the system or accessories will void your warranty. There are no user
serviceable components inside the PS3
™
system (the supplied hard
disk may be removed but not disassembled or modified).
Additionally, there is a risk of exposure to laser radiation as well as
to electrical shock.
Network
• A broadband connection is required to access the Internet. Note
that dial-up connectivity is not supported.
• User is responsible for Internet service fees. For details, refer to
the information provided in your service contract or contact your
Internet service provider.
• Do not use a cord for a standard residential telephone line or
cables of types other than those mentioned here. Using the wrong
type of cord or cable can cause more electrical current than
necessary to flow through the LAN connector, which may lead to
heat build-up, fire or malfunction.
Wireless networking feature
• The 2.4 GHz range of radio waves used by the wireless
networking feature of this product is a range shared by various
devices. This product has been designed to minimize the effect of
01PSP-1001 EN.book Page 7 Friday, April 22, 2011 6:45 PM
To Next Page
Loading...
Need help?
General
