Page 8 of 11 Last Modified: 8/12/03
BACK LIGHT
This light will turn green
when the flash is open.
This is located to the
bottom right of the Power
switch.
FADER
Use
or MONOTONE to fade in
or out of an image. Start on
STANDBY, record, press
FADER, return to
STANDBY. This is
located to the bottom left of
the Power switch
SEL/PUSH EXEC
This dial enables the user to
navigate through the menu.
This is located to the right
of the Power switch.
Menu Settings
To access the camera MENU setting, move the CAMERA/VTR/MEMORY
selector to
the CAMERA setting and push the MENU Button, which is located on the area where
the LCD Screen closes, next to the volume control. To navigate and select options use
the SEL/PUSH EXEC dial.
To access the VTR MENU setting, move the CAMERA/VTR/MEMORY
selector to the
VTR setting and push the MENU Button. To navigate and select options use the
SEL/PUSH EXEC dial, located to the right of the Power switch.
SETTING:
Manual Set
(Make sure the
selector switch is set
on CAMERA)
Program AE: A multi-use
button that allows users to set
aperture, shutter speed, and
reduce color suppression in
certain settings.
P Effect: (Picture effect) To add
special effects to recorded film.
Choose between negative art,
sepia, black and white,
solarize, slim, stretch, pastel,
and mosaic.
WHT BAL: Makes white
subjects look white and allows
more natural color balance.
AUTO SHTR: Activates
electronic shutter when filming
in bright conditions.
To Next Page
Loading...
Need help?
General