Calling
Check the following before
operating the unit.
- The BLUETOOTH function is
active on the mobile phone.
- Pairing
of
this unit and the
BLUETOOTH mobile phone
is
complete.
1 Press and hold the
POWER button
for
about 3 seconds while
the
unit
is turned off.
The indicator (blue) and
indicator (red) flash together
twice, the unit turns on and
then this unit automatically
connects to the last
BLUETOOTH mobile phone
that was used.
Note
Do not press and hold the POWER
button for more than 7 seconds,
otherwise pairing mode is entered.
Tip
This unit will stop trying to connect to the
BLUETOOTH mobile phone after I
minute. In such a case, press the multi
function button to try to connect again.
VOL-
button
.--
POWER
button
VOL + button
Multi function
lM-+l-+-I--
button
When you want to connect the unit
to a different BLUETOOTH mobile
phone from the last time, follow the
procedure in "When this unit does
not connect to a BLUETOOTH
mobile phone automatically."
When this unit does not
connect
to
a BLUETOOTH
mobile phone automatically
1 Make the BLUETOOTH
connection (HFP
or
HSP) from the
BLUETOOTH mobile
phone
to
this
unit.
Refer to the manual supplied
with your BLUETOOTH
mobile phone for operation
details.
The list
of
recognized devices
appears on the display
of
the
BLUETOOTH mobile phone.
This unit is displayed as
"DR-BTIOCX."
When you use the
BLUETOOTH mobile phone
features both HFP (Hands-free
Profile) and HSP (Headset
Profile)
*,
set to HFP.
* For details on profiles, see page 22.
Note
When listening to music by operating this
unit connected to a BLUETOOTH mobile
phone, make the BLUETOOTH
connection by operating the
BLUETOOTH mobile phone. This cannot
be done with the multi function button.
Continued 15
us
To Next Page
Loading...
Need help?
General
