7
GB
Detaching the Front Panel
You can detach the front panel of this unit to
prevent theft.
1 Press and hold OFF until the unit
turns off, press the front panel
release button , then pull the panel
towards you to remove.
Caution alarm
If you turn the ignition switch to the OFF
position without detaching the front panel,
the caution
alarm will sound for a few
seconds. The alarm will only sound if the
built-in amplifier is used.
Getting Started
Attaching the front panel
Resetting the Unit
Before operating the unit for the first time,
or after replacing the car battery or
changing connections, you must reset the
unit.
Press RESET on the inner panel with a ball-
point pen, etc., after detaching the front
panel.
Note
Resetting the unit will erase the clock setting and
some stored contents.
Pairing with a Bluetooth®
Device
When connecting
a BLUETOOTH device for
the first time, mutual registration (called
“pairing”) is required. Pairing enables this
unit and other devices to recognize each
other. This unit can connect two
BLUETOOTH devices (two mobile phones,
or a mobile phone and an audio device).
1 Press MENU, then rotate and press
the control dial to select [BLUETOOTH]
[PAIRING] [DEVICE 1]/[DEVICE 2]*.
flashes while the unit is in pairing
standby
mode.
* [DEVICE 1] or [DEVICE 2] will be changed to
the paired device name after pairing is
complete.
2 Perform pairing on the BLUETOOTH
device so it detects this unit.
3 Select your model name shown in
the
display of the BLUETOOTH device*.
When pairing is made, stays lit.
* If passkey input is required on the
BLUETOOTH
device, input [0000].
To Next Page
Loading...
Need help?
General
Weight and Dimensions
