21
Using optional equipment
Auxiliary audio equipment
By connecting an optional portable audio device
to the AUX input jack (stereo mini jack) on the
unit and then simply selecting the source, you
can listen on your speakers. The volume level is
adjustable for any difference between the unit
and the portable audio device. Follow the
procedure below:
Connecting the portable audio
device
1 Turn off the portable audio device.
2 Turn down the volume on the unit.
3 Connect to the unit.
* Be sure to use a straight type plug.
Adjust the volume level
Be sure to adjust the volume for each connected
audio device before playback.
1 Turn down the volume on the unit.
2 Press (SOURCE/OFF) repeatedly until “AUX”
appears.
After that, “AUX FRONT IN” appears.
3 Start playback of the portable audio device at a
moderate volume.
4 Set your usual listening volume on the unit.
5 Adjust the input level (page 19).
Marine remote commander
RM-X60M/X11M
Location of controls
The corresponding buttons on the marine remote
commander control the same functions as those
on this unit.
RM-X60M
RM-X11M
The following controls on the marine remote
commander require a different operation from
the unit.
• VOLUME (VOL) +/– button(s)
The same as the control dial on the unit.
• GP/ALBM –/+ button(s)
Radio:
To receive stored stations.
USB:
To skip albums.
• MUTING button
To attenuate the sound. (The same as (ATT) on
the card remote commander.)
Connecting cord*
(not supplied)
MODE
VOLUME
+/–
SOURCE
MUTING
(ATT)
OFF
GP/ALBM
–/+
SEEK –/+
MODE
VOL +/–
OFF
GP/ALBM
–/+
SEEK –/+
SOURCE
To Next Page
Loading...
Need help?
General
