27
Recording/Playback
US
Data code during recording
The recording date, time and condition , and coordinates (HDR-CX550V/XR550V) are
recorded automatically on the recording media. They are not displayed during recording.
However, you can check them as [DATA CODE] during playback. To display them, touch
(MENU) [Show others] [PLAYBACK SET] (under [PLAYBACK] category)
[DATA CODE] a desired setting
.
Shooting photos
In the default setting, photos are recorded on the following recording media.
HDR-CX550/CX550V: Internal memory
HDR-XR550/XR550V: Internal hard disk
Tips
To change the recording media, see page 21.
Press MODE to turn on the (Photo) lamp.
The LCD screen display switches for photo recording mode, and the screen aspect ratio
becomes 4:3.
Press PHOTO lightly to adjust the focus, then press it fully.
You can record photos also by touching on the LCD screen.
When disappears, the photo is recorded.
Flashes Lights up
To Next Page
Loading...
Need help?
General