Sony Handycam DCR-SR35E User Manual

8
Getting Started
Step 1: Charging the battery pack
DCR-SR55E/SR65E/SR75E/SR85E
4
DCR-SR35E/SR36E/SR45E/SR46E
You can charge the “InfoLITHIUM”
battery pack (H series) after attaching
it to your camcorder.
Notes

Your camcorder operates only with an
“InfoLITHIUM” battery pack (H series).
1 Turn the POWER switch in the
direction of the arrow to OFF (CHG)
(the default setting).
2 Attach the battery pack by sliding it
in the direction of the arrow until it
clicks.
3 For DCR-SR55E/SR65E/SR75E/
SR85E:
Connect the AC Adaptor to the DC
IN jack on the Handycam Station.
For DCR-SR35E/SR36E/SR45E/
SR46E:
Connect the AC Adaptor to the DC
IN jack on your camcorder.
Open the jack cover and connect the
DC plug of the AC Adaptor to the DC
IN jack.
4 For DCR-SR55E/SR65E/SR75E/
SR85E:
Connect the power cord (mains
lead) to the AC Adaptor and the
wall outlet (wall socket). Insert
the camcorder into the Handycam
Station securely, all the way to the
bottom.

When setting the camcorder onto the
Handycam Station, close the DC IN jack
cover.

Battery pack
DC IN jack
DC plug
With the  mark
on the top
AC Adaptor
Power cord
(Mains lead)
To the wall outlet
(wall socket)
CHG lamp
POWER switch
DC IN jack
DC plug
With the  mark on the right
Power cord
(Mains lead)
AC Adaptor
To the wall outlet
(wall socket)
Open the jack cover.

Sony Handycam DCR-SR35E Specifications

General

Brand	Sony
Model	Handycam DCR-SR35E
Category	Camcorder
Language	English