14
US
Getting started
Step 1: Charging the battery pack
You can charge the “InfoLITHIUM” battery pack (V series) after attaching it to your
camcorder.
Notes
You cannot attach any “InfoLITHIUM” battery pack other than the V series to your camcorder.
1
Turn off your camcorder by closing the LCD screen.
2
Attach the battery pack by sliding it in the direction of the arrow until it
clicks.
3
Connect the AC Adaptor and the power cord (mains lead) to your
camcorder and the wall outlet (wall socket).
The /CHG (flash/charge) lamp lights up and charging starts. The /CHG (flash/charge)
lamp turns off when the battery pack is fully charged.
/CHG (flash/charge) lamp
Battery pack
DC IN jack
To the wall outlet (wall
socket)
AC Adaptor
DC plug
Power cord (Mains
lead)
Align the mark on the DC plug with that on
the DC IN jack.
To Next Page
Loading...
Need help?
General
