Sony ICF-7600D Operating Instructions

MA ARR ee,
HOW TO CHANGE THE MW TUNING INTERVAL
The MW tuning interval is preset at the factory to 9 kHz to match th
frequency allocation system of most countrles. ;
If you use the radio where the frequency allocation system is based [n
a 10kHz interval, such as in Ше U.S.A. and Canada, set th
9kHz/10 kHz selector in the и back up/clock battery compar
ment to 10 kHz.
1 Remove both the radio and computer back up/clock batteries.
2 Switch the selector In the direction of the arrow.
3 Put the batteries back in the compartment and close the На.
Note: After removing the batteries, be sure to preset the statlons an.
set the timer again. When the batteries are removed, the preset st
tlons and the timer-setting time will be erased.
PRESET TUNING
HOW TO PRESET
The numbers in the Illustration refer to the Sequence of operations.
Set
the
MAIN
POWER
switch
to
ON.
i
Press
the
ON
button.
Tune.in
the
desired
station
using
any
tuning
method—
dir
tuning,
scan
tuning
(page
20)
or
manual
tuning
(page
22).
Press [ЕХЕСОТЕ | for direct tuning.
ә № ~

Sony ICF-7600D Specifications

General

Brand	Sony
Model	ICF-7600D
Category	Receiver
Language	English