52-GB
Using image data with other equipment
Viewing the images on TV
Connect the camera to the TV that has a video and audio input jack.
Adjust VIDEO OUT (NTSC/PAL) in the menu settings before
viewing the images on TV. (p. 56, 58, 59)
1 Connect the A/V OUT jack of the camera to the
video and audio input jack of the TV.
2 Set the TV/VIDEO input select on the TV to VIDEO.
3 Start playback on the camera.
Playback picture appears on the TV screen.
Notes
• Before making connections, turn off each equipment. After connections are
completed, turn on each equipment.
• When you use the camera with connecting other equipment for a long time,
use the AC power adaptor/charger (not supplied).
• You cannot use a TV that has an antenna (aerial) connector only.
• Beep does not sound when connecting with the A/V connecting cable.
• When the audio input jack of TV is stereo type, connect the audio plug of the
A/V connecting cable to a audio input jack (white) of TV.
• When you record images connecting your camera with TV, the sound is
muted.
• When you connect the A/V connecting cable to TV, the display of your
camera turns off.
to A/V OUT
A/V connecting cable
(supplied)
k Various playback
To Next Page
Loading...
Need help?
General
