28
4 Rotate the control dial until “BTA VOL”
appears, then press it.
5 Rotate the control dial to adjust the input
level (“+18dB” – “0dB” – “– 8dB”), then
press it.
6 Press (BACK) to return to the previous
display.
Operating an audio device
with this unit
You can perform the following operations
on this unit if the audio device supports
AVRCP (Audio Video Remote Control
Profile) of Bluetooth technology. (The
operation differs depending on the audio
device.)
*1 Press repeatedly until the desired setting
appears.
*2 Depending on the device, it may be necessary
to press twice.
Operations other than the above should be
performed on the audio device.
Notes
• Depending on the audio device, information,
such as title, track number/time, playback
status, etc., may not be displayed on this unit.
The information is displayed during Bluetooth
audio playback only.
• Even if the source is changed on this unit,
playback of the audio device does not stop.
Initializing Bluetooth
Settings
You can initialize all the Bluetooth related
settings (pairing information, preset
number, device information, etc.) from this
unit.
1 Press and hold for 1
second to turn off the power.
2 Press , rotate the control dial
until “BT” appears, then press it.
The menu list appears.
3 Rotate the control dial to select “BT
INIT,” then press it.
The confirmation appears.
4 Rotate the control dial to select “INIT-
YES,” then press it.
“INITIAL” flashes while initializing the
Bluetooth settings; “COMPLETE”
appears when initializing has finished.
5 Press (BACK) to return to the
previous display.
Note
When disposing of this unit, preset numbers
should be deleted with “BT INIT.”
To Do this
Skip albums
Press
/
(ALBUM
/
)
[press once for each album]
Repeat play Press (REP)*
1
Shuffle play Press (SHUF)*
1
Play Press (PAUSE)*
2
on
this unit.
Pause Press (PAUSE)*
2
on
this unit.
Skip tracks Press –/+ (/
) [press once for each
track]
Reverse/
Fast-forward
Press and hold –/+
(/) [hold to
desired point]
To Next Page
Loading...
Need help?
General
