64
GB
MHC-V41D.GB.4-729-484-13(1)
Receiving a call
1 Press when a call is incoming.
When an incoming call arrives,
playback pauses and the system
emits a ring tone.
The system shows the caller phone
number or name on the display.
Note
If you hold down when a call is
incoming, the call will be rejected.
2 Talk into the system’s built-in
microphone.
3 Press to end the call.
Making a call
1 Make a call by operating the
connected BLUETOOTH mobile
phone.
When you make a call, playback will
pause and the system will emit a
dial tone.
2 Talk into the system’s built-in
microphone when the other
party answers the call.
3 Press to end the call.
Switching the phone call
output from the system to the
mobile phone, and vice versa
Hold down while talking.
Note
••
The volume is different for music
playback and calls. Adjust the volume
during calls.
••
If the caller cannot hear or can barely
hear your voice, talk more closely into
the built-in microphone of the system.
••
Noise may result if the system and
the BLUETOOTH mobile phone are
placed too close together. Place the
BLUETOOTH mobile phone farther away
if there is audible noise.
Hint
••
If your BLUETOOTH mobile phone
supports both HFP and HSP, set it to
HFP.
••
If you were listening to music before
the call, playback will resume when the
call ends.
••
Operations may vary depending on the
BLUETOOTH mobile phone. Refer to the
operating instructions for your mobile
phone.