masterpage:Right
filename[D:\WORKS\CD\3067952121\3067952121DirectCDUC\02GB-
DirectCDUC\03pre.fm]
11
model name1[MVC-CD200/CD300]
[3-067-952-12(1)]
Once your disc is formatted as a DirectCD disc, you can write data to it in several
different ways:
• To drag and drop files from Windows Explorer onto the disc drive icon.
• To select [Save As] from the File menu of a Windows application and select the
driveletterofthecamera.
• To use the [Send To] command.
• To use MS-DOS command prompts from a DOS window in Windows.
Notes
• If the file name format of images does not correspond to the following format,
DSC0
ssss
.JPG, you cannot play them back on the camera. For details, refer to the
operating instructions of the camera.
• Depending on the file type, the file may not be able to be played back on the camera.
2
Turn on the camera and your computer.
“DirectCD Disc Ready” appears on the screen.
If this screen does not appear, double-click the CD icon on the Windows
taskbar, in the lower corner of your screen.
3
Click [OK].
Writing data to a disc
01cov.book Page 11 Monday, July 23, 2001 2:09 PM
To Next Page
Loading...
Need help?
General
