31
GB
Additional Information
Specifications
AUDIO POWER
SPECIFICATIONS
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
(USA model only)
With 3.5 ohm loads, both channels driven,
from 120
– 10,000 Hz; rated 50 watts per
channel minimum RMS power, with no
more than 0.7% total harmonic distortion
from 250 milliwatts to rated output.
Amplifier section
The following are measured at
USA model:
AC 120 V, 60 Hz
Mexican model:
AC 120 V – 240 V, 60 Hz
Other models:
AC 120 V – 240 V, 50/60 Hz
FST-GTK37iP/RDH-GTK37iP
Power output (rated):
100 W + 100 W (at 3.5 ohms, 1 kHz,
1% THD)
RMS output power (reference):
210 W + 210 W (per channel at
3.5 ohms, 1 kHz)
FST-GTK17iP/RDH-GTK17iP
Power output (rated):
55 W + 55 W (at 3 ohms, 1 kHz,
1% THD)
RMS output power (reference):
115 W + 115 W (per channel at 3 ohms,
1 kHz)
Speaker section
Speaker system
2 way speaker system, Bass reflex
Speaker units
FST-GTK37iP/RDH-GTK37iP:
Woofer: 200 mm (7
7
/
8
in), cone type
Tweeter: 66 mm (2
5
/
8
in), cone type
FST-GTK17iP/RDH-GTK17iP:
Woofer: 160 mm (6
3
/
8
in), cone type
Tweeter: 40 mm (1
5
/
8
in), cone type
Rated impedance
FST-GTK37iP/RDH-GTK37iP:
3.5 ohms
FST-GTK17iP/RDH-GTK17iP:
3 ohms
Input
DVD/PC IN (audio in L/R):
FST-GTK37iP/RDH-GTK37iP:
Sensitivity 1 V, impedance 47 kilohms
FST-GTK17iP/RDH-GTK17iP:
Sensitivity 1.5 V, impedance
47 kilohms
iPod/iPhone section
Terminal for Apple Device
Output voltage: DC 5 V
Maximum output current: 1 A
Compatible iPod/iPhone models:
– iPod touch 5th generation
– iPod nano 7th generation
– iPhone 5
(USB) port
Maximum output current: 1 A
Compatible iPod/iPhone models:
– iPod touch 5th generation
– iPod touch 4th generation
– iPod touch 3rd generation
– iPod touch 2nd generation
– iPod nano 7th generation
– iPod nano 6th generation
– iPod nano 5th generation (video
camera)
– iPod nano 4th generation (video)
– iPod nano 3rd generation (video)
– iPod classic
– iPhone 5
– iPhone 4S
– iPhone 4
– iPhone 3GS
– iPhone 3G
To Next Page
Loading...
Need help?
General
