24
RM-VLZ620_U (US) 4-170-639-12(1)
2 Enter 9 - 0 - 5.
The SET indicator flashes three
times to indicate that the setting
mode has been entered.
3 flashes
3 Press the desired Device
Select button.
When the learned functions is
cleared, the SET indicator flashes
three times and the indicators
turn off.
3 flashes
To cancel the process
Press SET anytime.
Teaching the Device Select
or SYSTEM CONTROL
buttons
For example, if you want to switch
your amplifier to DVD input, teach
an input select signal to the DVD
Device Select button so that the
amplifier is automatically switched
to DVD simply by pressing the DVD
Device Select button. (For this
operation, the amplifier should first
be turned on.)
Notes
Use new batteries in both remote control
units.
If a consecutive procedure has been
programmed to the button (page 28), the
setting procedure will be canceled.
SET/SET
indicator
9, 8
Device
Select
buttons
SYSTEM
CONTROL
buttons
To Next Page
Loading...
Need help?
General
