Wireless Speaker
SRS-XB13
Pairing and connecting with BLUETOOTH
®
devices
Pairing is the process required to mutually register the information on BLUETOOTH devices
to be connected wirelessly.
To pair with a second or subsequent BLUETOOTH device, perform the following pairing
procedure for each device.
Before operating the speaker, be sure to do the following:
Place the BLUETOOTH device within 1 m (3.2 ft) of the speaker.
Connect the speaker to an AC outlet via a USB AC adaptor (commercially available). Or
charge the built-in battery sufficiently.
To avoid any sudden loud sound output from the speaker, turn down the volume of both
the BLUETOOTH device and the speaker or stop music playback.
Depending on the BLUETOOTH device, the volume of the device may be synchronized
with the speaker.
Prepare the operating instructions supplied with the BLUETOOTH device for reference.
Turn on the speaker.
1
Check the status of the (BLUETOOTH) indicator.
When the indicator is double flashing
2
To Next Page
Need help?
General
Weight and Dimensions
