47
Additional Information
Specifications
AUDIO POWER
SPECIFICATIONS
POWER OUTPUT AND
TOTAL HARMONIC
DISTORTION:
With 8 ohm loads, both
channels driven, from 20 -
20,000 Hz; rated 100
a)
watts per channel
minimum RMS power,
with no more than 0.09%
total harmonic distortion
from 250 milliwatts to
rated output (USA model
only).
STR-DE445:
a) 80 watts
Amplifier section
Rated Power Output at Stereo mode
(8 ohms 20 Hz - 20 kHz,
THD 0.09%)
STR-DE545/SE501
100 W + 100 W
STR-DE445:
80 W + 80 W
Reference Power Output
(8 ohms at 1 kHz, THD
0.7%)
STR-DE545/SE501:
Front: 100 W + 100 W
Center: 100 W
Rear: 100 W + 100 W
STR-DE445:
Front: 80 W + 80 W
Center: 80 W
Rear: 80 W + 80 W
Frequency response
CD, MD/TAPE, DVD/
LD, TV/SAT,
VIDEO, AUX:
10 Hz - 50 kHz +0.5/
–2 dB (with sound
field, tone, and bass
boost bypassed)
Inputs (Analog)
5.1 CH INPUT, CD,
DVD/LD, MD/
TAPE, TV/SAT,
VIDEO, AUX:
Sensitivity: 250 mV
Impedance: 50
kilohms
S/N
b)
: 96 dB (A, 250
mV
c)
)
b) Input short.
c) Weighted network, input level.
Inputs (Digital)
DVD/LD (coaxial):
Sensitivity: –
Impedance: 75 ohms
S/N: 100 dB (A, 20
kHz LPF)
DVD/LD, TV/SAT*
(Optical):
Sensitivity: –
Impedance: –
S/N: 100 dB (A, 20
kHz LPF)
*) STR-DE545 and STR-SE501 only.
Outputs MD/TAPE, (REC OUT);
VIDEO (AUDIO
OUT):
Voltage: 250 mV,
Impedance: 10
kilohms
SUB WOOFER:
Voltage: 2 V
Impedance: 1
kilohms
PHONES:
Accepts low- and
high-impedance
headphones
BASS BOOST +6 dB at 70 Hz
TONE ±6 dB at 100 Hz and
10 kHz
Sampling Frequency
48 kHz
To Next Page
Loading...
Need help?
General
