TDG-BR250/BR200 4-270-765-62(1)
TDG-BR250/BR200 4-270-765-62(1)
5 (GB)
Note
When operating: the indicator lights up green and the battery cannot be
charged.
IR Sensor
Receiving IR (infrared rays) signals are emitted from the front of the 3D Sync
Transmitter.
IR’s entry angle differs according to distance and/or usage environment.
Note
Please keep the IR Sensor clean.
Connector for charge
Charge the battery. When charging, open the cover.
Charging the battery
To prevent battery deterioration, charge the battery at least once every
half a year or a year.
1
Turn the 3D Glasses power off.
2
Turn the TV power on.
Note
When the TV is in standby mode, this product cannot be charged.
3
Connect the 3D Glasses and the TV with the supplied USB cable.
Open the cover. Connect the USB
cable.
To TV’s USB port.
When connecting this product and the TV with USB cable, this product will start
to charge.
(When charging, the LED indicator lights up yellow.)
If you turn the power of this product on when charging the battery, charging will
be stopped.
(When operating, the indicator lights up green.)
To Next Page
Loading...
Need help?
General
