33Adjusting the Picture Using Real Color Processing
Projecting
2 Press M or m to select “Position” or “Range,” and specify it more
delicate color and color range you want to adjust using
< or ,.
4 Adjust the color of the specified portions.
Press
M or m to select “RCP Color” or “RCP Hue,” then adjust the color or
hue of the portions selected in step 3 to suit your taste using
< or , while
watching the projected picture. The picture is returned to normal color
during adjustment.
5 After the adjustment is complete, press RCP.
The RCP window disappears and the normal picture is restored.
The adjusted data will be stored in a memory selected in step 2 and will be
recalled later.
Tip
There are some limitations on selection of position and range.
Sel : Set : Exit :
RCP (Real Color Processing)
Color Select : Red
Adjust
Adjust
Position :
Range :
RCP Color : 0
RCP Hue : 0
Reference palette
Sel : Set : Exit :
RCP (Real Color Processing)
Color Select : Red
Adjust
Range :
RCP Color : 0
RCP Hue : 0
Adjust
Position :
To Next Page
Loading...
Need help?
General
