Help Guide
Wireless Noise Canceling Stereo Headset
WH-1000XM5
Connecting to a paired computer (Mac)
Compatible OS
macOS (version 10.15 or later)
Before starting the operation, make sure of the following:
Depending on the computer you are using, the built-in Bluetooth adaptor may need to be turned on. If you do not
know how to turn on the Bluetooth adaptor or are unsure if your computer has a built-in Bluetooth adaptor, refer to
the operating instructions supplied with the computer.
Set the computer speaker to the ON mode.
If the computer speaker is set to the “OFF” mode, no sound is heard from the headset.
Computer speaker in the ON mode
Wake the computer up if the computer is in standby (sleep) or hibernation mode.
1
Turn on the headset.
Press and hold the
(power) button for about 2 seconds.
You will hear a notification sound announcing that the headset is turned on.
The indicator (blue) continues to flash even after you release your finger from the button.
If the headset has automatically connected to the last connected device, you will hear a notification sound
announcing that the connection is established.
Check the connection status on the computer. If it is not connected, proceed to step
.
2
Select the headset using the computer.
3
Select [
(System Preferences)] - [Bluetooth] from the Dock at the bottom of the screen.
1.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
