Help Guide
Wireless Noise Canceling Stereo Headset
WH-1000XM5
Functions for a phone call
The functions available during a call may vary depending on the profile supported by your smartphone or mobile phone.
In addition, even if the profile is the same, the functions may vary depending on the smartphone or mobile phone.
Depending on the connected device or the application you are using, the functions may not work properly even if you try
to operate them with the touch sensor control panel.
Refer to the operating instructions supplied with the smartphone or mobile phone.
Supported profile: HFP (Hands-free Profile)
During standby/music playback
Hold your finger to the touch sensor control panel for about 1 second to start up the voice dial function of the
smartphone/mobile phone, or activate the Google app on the Android smartphone or Siri on the iPhone.
Outgoing call
Tap the touch sensor control panel twice quickly (with an interval of about 0.4 seconds) to cancel an outgoing call.
Hold your finger to the touch sensor control panel to change the call device back and forth from the headset to the
smartphone/mobile phone.
Incoming call
Tap the touch sensor control panel twice quickly to answer a call.
Hold your finger to the touch sensor control panel to reject a call.
During call
Tap the touch sensor control panel twice quickly to finish a call.
Hold your finger to the touch sensor control panel to change the call device back and forth from the headset to the
smartphone/mobile phone.
Supported profile: HSP (Headset Profile)
Outgoing call
Tap the touch sensor control panel twice quickly to cancel an outgoing call.
Incoming call
To Next Page
Loading...
Need help?
General
Weight and Dimensions
