To delete all Bluetooth pairing information, see “Initializing the headset to restore factory settings”.
Note
When registering a device (pairing), [WH-XB700], [LE_WH-XB700], or both may be displayed on the connecting device. When
both or WH-XB700] is displayed, select [WH-XB700]; when [LE_WH-XB700] is displayed, select [LE_WH-XB700].
If pairing is not established within 5 minutes, pairing mode is canceled, and the headset turns off. In this case, start the operation
over from step 1.
Once Bluetooth devices are paired, there is no need to pair them again, except in the following cases:
Pairing information has been deleted after repair, etc.
When a 9th device is paired.
The headset can be paired with up to 8 devices. If a new device is paired after 8 devices are already paired, the registration
information of the paired device with the oldest connection date is overwritten with the information for the new device.
When the pairing information for the headset has been deleted from the Bluetooth device.
When the headset is initialized.
All of the pairing information is deleted. In this case, delete the pairing information for the headset from the device and then pair
them again.
The headset can be paired with multiple devices, but can only play music from 1 paired device at a time.
Related Topic
How to make a wireless connection to Bluetooth devices
Connecting to a paired Bluetooth device
Listening to music from a device via Bluetooth connection
Disconnecting Bluetooth connection (after use)
Initializing the headset to restore factory settings
4-747-579-11(3) Copyright 2019 Sony Corporation
To Next Page
Loading...
Need help?
General
