Help Guide
Wireless Stereo Headset
WH-XB700
Supported codecs
A codec is an audio coding algorithm used when transmitting sound via a Bluetooth connection.
The headset supports the following 3 codecs for music playback via an A2DP connection: SBC, AAC, and aptX.
SBC
This is an abbreviation for Subband Codec.
This is the standard audio coding technology used by Bluetooth devices.
All Bluetooth devices support SBC.
AAC
This is an abbreviation for Advanced Audio Coding.
AAC is mainly used by Apple products such as iPhone, and it provides higher sound quality than that of SBC.
aptX
This is an audio coding technology. aptX is used by some Android smartphones, and it provides higher sound quality
than that of SBC.
With the headset set to the “Priority on sound quality” mode, when music in one of the above codecs is transmitted from
a connected device, the headset switches to that codec automatically and plays back the music in the same codec.
However, depending on the device to be connected with the headset, you may need to set the device beforehand to
listen to music using the desired codec on the headset, even if the device supports a codec of higher sound quality than
SBC.
Refer to the operating instructions supplied with the device regarding setting the codec.
Related Topic
About the sound quality mode
4-747-579-11(3) Copyright 2019 Sony Corporation
To Next Page
Need help?
General
