Help Guide
Wireless Stereo Headset
WF-C500
Receiving a call
You can enjoy a hands-free call with a smartphone or mobile phone that supports the Bluetooth profile HFP (Hands-free
Profile) or HSP (Headset Profile), via Bluetooth connection.
If your smartphone or mobile phone supports both HFP and HSP, set it to HFP.
The operation may vary depending on the smartphone or mobile phone. Refer to the operating instructions supplied
with the smartphone or mobile phone.
Depending on the connected device or the application you are using, the functions may not work properly even if you
try to operate them with the headset.
Ring tone
When you receive an incoming call, a ring tone will be heard from the headset.
You will hear either of following ring tones, depending on your smartphone or mobile phone.
Ring tone set on the headset
Ring tone set on the smartphone or mobile phone
Ring tone only for a Bluetooth connection set on the smartphone or mobile phone
Connect the headset to a smartphone or mobile phone via Bluetooth connection beforehand.
1
When you hear a ring tone, press the button on the left or right unit of the headset and receive the call.
A voice will be heard from the headset.
When you receive an incoming call while you are listening to music, playback pauses and a ring tone will be heard
from the headset.
You can talk using the microphones on the headset.
A: Microphones (left, right)
If no ring tone is heard via the headset
2
To Next Page
Loading...
Need help?
General
