Help Guide
Wireless Noise Canceling Stereo Headset
WF-C700N
Charging
The headset and the charging case contain built-in lithium-ion rechargeable batteries. Use the supplied USB Type-C
cable to charge the headset before use.
Set the headset units into the charging case.
Put the left headset unit (the headset unit with the tactile dot) back into the left hole of the charging case, and put
the right headset unit back into the right hole of the charging case. Each headset unit will be set to the correct
position in the charging case by the built-in magnet.
When the rechargeable battery of the charging case still has power, the indicator (orange or green) on the charging
case lights up for about 3 seconds.
The charging starts on the headset. Close the charging case lid.
1
Connect the charging case to an AC outlet.
Use the supplied USB Type-C cable and a commercially available USB AC adaptor.
A: USB AC adaptor
2
To Next Page
Loading...
Need help?
General
