3Sophos Switch Series
Operating Instructions
Interfaces (front)
Model 1G LAN Ports 2.5G LAN ports SFP/SFP+ Fiber ports Max. PoE Capacity Max. 15W/30W/60W PoE Devices
CS101-8 8 0 2 SFP N/A N/A
CS101-8FP 8 0 2 SFP 110W 7/3/-
CS110-24 24 0 4 SFP+ N/A N/A
CS110-24FP 24 0 4 SFP+ 410W 24/13/-
CS110-48 48 0 4 SFP+ N/A N/A
CS110-48P 48 0 4 SFP+ 410W 26/13/-
CS110-48FP 48 0 4 SFP+ 740W 48/24/-
CS210-8FP 0 8 4 SFP+ 240W 8/8/4
CS210-24FP 16 8 4 SFP+ 410W 24/13/-
CS210-48FP 32 16 4 SFP+ 740W 48/24/-
Note: All ports on a PoE model are PoE capable according to 802.3af/at standard, CS210-8FP also supports the 802.3bt standard
Other Interfaces Type Comment
COM RJ45 You can connect a serial console to the RJ45 COM port to access the Command Line Interface (CLI).
The required connection settings are:
Ì Bits per second: 115,200
Ì Data bits: 8
Ì Parity: N (none)
Ì Stop bits: 1
Reset Button Press and hold the reset button for 7 seconds to reset the switch to the factory
default settings. All configuration including the login password will be reset.
LED Mode
(PoE models only)
Button Press to switch the meaning of the left LED on each RJ45 port (labeled
with ‘LED Mode’) between LAN Mode and PoE Mode.
To Next Page
Loading...
Need help?
General
