IMPORTANT SAFETY INFORMATION
GENERAL SAFETY WARNINGS
Read all safety warnings and instructions. Failure to follow the warnings and instructions
may result in electric shock, re and/or serious injury. Save all warnings and instructions
for future reference.
SAFETY
The warnings, precautions, and instructions discussed in this instruction manual cannot cover
all possible conditions and situations that may occur. It must be understood by the operator that
common sense and caution are factors which cannot be built into this product, but must be supplied
by the operator. Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS
before operating. Failure to follow the safety rules and other basic safety precautions may result in
serious personal injury.
Stay alert, watch what you are doing, and use common sense when operating the tool. Do not use the
tool while you are tired or under the inuence of drugs, alcohol, or medication.
Handling the cord on this product will expose you to lead, a chemical known to the State of
California to cause cancer, and birth defects or other reproductive harm. Wash hands after handling.
(California Health & Safety Code § 25249.5, et seq.)
Do not overreach. Keep proper footing and balance at all times.
1
Read and understand all instructions. Failure to follow all instructions may result in serious injury
or property damage.
Do not allow persons to operate or assemble the product until they have read this manual and
have developed a thorough understanding of how it works.
Do not modify this product in any way. Unauthorized modication may impair the function and/or
safety and could affect the life of the product. There are specic applications for which the product
was designed.
Hold the Welder securely during use. If it falls while plugged in, severe injury, electric shock, or re
may result.
Inspect the work area before each use. Keep work area clean, dry, free of clutter, and well-lit.
Cluttered, wet, or dark work areas can result in injury. Using the product in conned work areas
may put you dangerously close to cutting tools and rotating parts.
Do not use the product where there is a risk of causing a re or an explosion; e.g., in the
presence of ammable liquids, gases, or dust.
Avoid unintentional starting. Make sure you are prepared to begin work before turning on the Welder
Keep children and bystanders away from the work area while operating the tool. Do not allow
children to handle the product.
This product, when used for welding and similar applications, contains or produces a chemical
known to the State of California to cause cancer and birth defects (or other reproductive harm).
(California Health & Safety Code § 25249.5, et seq.)
To Next Page
Loading...
Need help?
General
