Warning：check whether blade is loose regularly before work.
Before you start working, read the operating instructions of machine.
GENERAL SAFETY RULES
WARNING! Read and understand all instructions. Failure to follow all instructions listed below, may
result in electric shock, fire and / or serious personal injury. The term “power tool” in all of the warnings
listed below refers to your mains-operated ( corded) power tool.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-
operated (cordless) power tool.
Work area safety
Keep your work area clean and well lit.
Cluttered worksites and dark areas invite accidents.
Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquid,
gases, or dust. Power tools create sparks which may ignite the dust or fumes.
Keep bystanders, children, and visitors away while operating a power tool. Distractions can cause you to
lose control.
Electrical Safety
Grounded tools must be plugged into an outlet properly installed and grounded in accordance with all
codes and ordinances. Never remove the grounding prong or modify the plug in any way. Do not use any
adaptor plugs. Check with a qualified electrician if you are in doubt as to whether the outlet is properly
grounded. If the tools should electrically malfunction or break down, grounding provides a low resistance
path to carry electricity away from the user.
Avoid body contact with grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an
increased risk of electric shock if your body is grounded.
Don’t expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of
electric shock.
Don’t abuse the cord. Never use the cord to carry the tools or pull the plug from an outlet. Keep cord
away from an outlet. Keep cord away from heat, oil, sharp edges or moving parts. Replace damaged
cords immediately. Damaged cords increase the risk of electric shock.
When operating a power tool outside, use an outdoor extension cords marked “W-A” or “W”. These cords
are rated for outdoor use and reduce the risk of electric shock.
If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected
supply. Use of an RCD reduces the risk of electric shock.
Personal Safety
Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use
tool while tired or under the influence of drugs, alcohol. A moment of inattention while operating power
tools may result in serious personal injury.
Use safety equipment， Always wear eye protection.，Safety equipment such as dust mask, non-skid
safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.
Avoid accidental starting. Be sure switch is off before plugging in. Plugging in tools that have the switch
on invites accidents.
Remove adjusting keys or switches before turning the tool on. A wrench or a key that is left attached to a
rotating part of the tool may result in personal injury.
Do not overreach. Keep a proper footing and balance at all times. Proper footing and balance enables
better control of the tool in unexpected situations.
Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from
moving parts. Loose clothes, jewelry or long hair can be caught in moving parts.
If devices are provided for the connection of dust extraction and collection facilities, ensure these are
connected and properly used. Use of dust collection can reduce dust-related hazards.
Tool use and care
Do not force tool. Use the correct tool for your application. The correct tool will do the job better and safer
at the rate for which it is designed.
Do not use tool if switch does not turn it on or off. Any tool that cannot be controlled with the switch is
dangerous and must be repaired.
Disconnect the plug from the power source before making any adjustments, changing accessories, or
storing the tool. Such as preventive safety measures reduce the risk of starting the tool accidentally.
Store idle tools out of reach of children and do not allow persons unfamiliar with the power tool or theses
instructions to operate the power tool. Tools are dangerous in the hands of untrained users.
Maintain tools with care. Properly maintained tools are less likely to bind and are easier to control.
To Next Page
Loading...
General