Figure 2
Figure 3
Figure 4
Vacuum cleaner connection
To keep worker away from dust and keep workplace clean, connect vacuum cleaner adaptor to this
machine’s socket while scouring.
Carbon brush replacement
The accessories includes an original set of carbon brush, when the carbon brush wear limit, replace with
the new one. Screwdriver counter clock wise unscrew the brush cover, remove the original carbon brush,
to put new carbon brush to brush holder and screw on the brush cover.
To change carbon brush in the bottom, take off stainless steel plate first .
Scouring height adjustment：
When height adjuster is at the same level of steel plate, this machine is at the max height of scouring,
3.5mm
To Next Page
Loading...
General