EN - 2
•
•
•
2.3 DURING OPERATION
Work Area
• -
-
•
•
• -
•
•
•
•
•
•
• -
Behaviour
•
before and during operations in reverse gear.
•
•
•
•
•
• Do not touch the parts of the engine that heat up during
If something breaks or an accident occurs during
mowing, turn o the motor immediately and move the
machine away to prevent further damage; if an accident
occurs with injuries or third parties are injured, carry
out the rst aid measures most suitable for the situation
immediately and contact the medical authorities for
any necessary health care. Carefully remove any debris
which could cause damage or injury to persons or ani-
mals if ignored.
Use limitations
•
•
installed in their seats.
•
• -
•
2.4 MAINTENANCE, STORAGE AND TRANSPORT
-
Maintenance
•
never repaired.
•
a regular basis.
•
The noise and vibration levels shown in these
instructions are the maximum levels for use of the ma-
chine. The use of an unbalanced cutting element, the
excessive speed of movement, or the absence of main-
tenance have a signicant inuence on noise emissions
and vibrations. Consequently, it is necessary to take
preventive steps to eliminate possible damage due to
high levels of noise and stress from vibration; Maintain
the machine well, wear ear protection devices, and take
breaks while working.
Storage
•
a strong heat source.
•
2.5 ENVIRONMENTAL PROTECTION
-
• Avoid being a disturbance to the neighbourhood. Use this
• -
•
•
in force.
3. GETTING TO KNOW THE MACHINE
3.1 DESCRIPTION OF THE MACHINE AND
PLANNED USE
This machine is pedestrian-controlled lawnmower.
To Next Page
Loading...
Need help?
General
