EN - 8
Make sure damaged, miss-shapen or worn cut-
ting-means are replaced, together with its own screws
in place to preserve balance.
IMPORTANT Always use original cutting means
bearing the code indicated in the “Technical Data”.
8.2 POWER CABLE
9. STORING
9.1 STORING
1.
2.
3.
contact the authorised service centre.
4.
•
•
•
•
•
1.
2.
3.
9.1.1 Vertical storage
Make sure the hook and its fastening system are
adequate and able to sustain the machine’s weight;
exercise caution and make sure children or animals
do not climb on the machine, weighing down the hook.
Fasten the machine so that the cutting means faces a
wall or is properly covered, so it is not dangerous in the
event of accidental contact with persons, children or
animals.
10. HANDLING AND TRANSPORTATION
1.
2.
3.
4.
1.
2.
3.
4. Position it so that it does not cause
5.
using ropes or chains.
•
•
11. ASSISTANCE AND REPAIRS
all obligations and responsibilities of the Manufacturer.
•
•
• Genuine spare parts and accessories have
•
•
to an authorised service centre for servicing,
To Next Page
Loading...
Need help?
General
