1.
2.
Repeat the procedure until the line
• Manual line release
1.
2.
housing
3.
.
4.
5.
6.5 ADVICE FOR OPERATION
–
–
–
–
6.6 STOP
1.
2. Wait until the cutting head stops.
When you have stopped the
machine, it will take a few seconds
for the cutting head to stop.
IMPORTANT Always stop the machine
when moving between work areas.
6.7 AFTER USE
•
and recharge it .
•
storing in an enclosed space.
•
•
the authorised service dealer.
IMPORTANT Always remove the
battery (par 7.2.2) whenever you leave
the machine unused or unattended.
7. MAINTENANCE
7.1 GENERAL INFORMATION
IMPORTANT The safety regulations
to follow are described in chap. 2. Strictly
comply with these instructions to avoid
serious risks or dangers.
Before performing any
inspections, cleaning or maintenance/
adjustment on the machine:
• Stop the machine.
• Remove the battery from its housing
and recharge it (para. 7.2.2) (never leave
the battery inserted or within the reach
of children or unauthorised persons).
• Allow the motor to cool before
storing in an enclosed space.
• Use suitable clothing, protective
gloves and goggles.
• Read the relevant instructions.
IMPORTANT Any maintenance and
adjustment operations not described in
this manual must be carried out by your
dealer or Authorised Service Dealer.
7.2 BATTERY
7.2.1
cuttable vegetation area before recharging
a.
–
b.
–
– adopting a cutting technique
To Next Page
Loading...
Need help?
General
