EN - 14
3.
indicated on the rating plate.
4. according
NOTE The battery is equipped with a guard
that inhibits recharging if the environmental
temperature is not between 0 and +45 °C.
NOTE The battery can be recharged at any
time, even partially, with no risk of damaging it.
7.2.3
When recharging is
1.
2.
3.
7.3 CLEANING THE MACHINE
AND THE MOTOR
•
•
• Do not use aggressive detergents or solvents
to clean the plastic parts or hand grips.
•
•
cooling air vents clean and free of debris.
•
7.4 NUTS AND BOLTS
•
•
8. OCCASIONAL MAINTENANCE
Prior to carrying out any maintenance
operation, you need to:
• stop the machine;
• remove the battery from its housing
and recharge it (par 7.2.2);
• allow the motor to cool before
storing in an enclosed space;
• use suitable clothing, protective
gloves and goggles;
• read the relevant instructions.
Warning! Risk of injuries due
to dangerous moving parts!
8.1 CUTTING MEANS MAINTENANCE
indicated on the Technical Data table
Do not touch the cutting means until
the battery has been removed and the
cutting means is completely stationary.
8.1.1
cutting line head
1.
2.
3.
4.
8.1.2 Replacing the cutting line head
1.
2.
3.
4.
To Next Page
Loading...
Need help?
General
