Need help?Do you have a question about the Stiga PARK PRO 20 and is the answer not in the manual?
General| Brand | Stiga |
|---|---|
| Model | PARK PRO 20 |
| Category | Lawn Mower |
| Language | English |
Indicates potential personal injury or damage if instructions are not followed.
Must read safety instructions and manual before operating the machine.
Explains symbols used on the machine for care and attention.
Pedal for raising front-mounted implement to transport position.
Hydraulic control for raising front-mounted implements.
Pedal combining service brake and clutch with three positions.
Pedal controlling the machine's braking system with three positions.
Inhibitor to lock the brake pedal in depressed position for parking.
Pedal activating the variable transmission to control speed and direction.
Adjusts steering wheel height for operator comfort.
Controls engine speed and chokes engine for cold starts.
Pull-type control to choke the engine when starting from cold.
Ignition key for starting/stopping engine and controlling spotlight.
Lever for selecting forward gears, neutral, or reverse.
Lever for engaging/disengaging power take-off for accessories.
Switch for engaging/disengaging electromagnetic power take-off.
Lever to lock rear wheels for improved traction on slippery surfaces.
Indicates the number of working hours.
Switch to lock the drive pedal at a desired speed.
Control for electrical adjustment of cutting deck height.
Control for electrical adjustment of a rear rake.
Switch to start and stop an electrical sand spreader.
Lever to disengage transmission for manual movement of the machine.
Fuel cap with integrated fuel gauge.
Using specific STIGA cutting decks or flail mower.
Using brush units or collector brush units for sweeping.
Using snow blades or snow throwers for snow clearance.
Using towed collectors for grass and leaves.
Using dump carts for grass and leaf transport.
Using sand spreader for spreading sand or salt.
Using front mounted hoe and rear mounted rake.
Using an edge trimmer.
Using a moss scarifier.
Instructions for removing and fitting the engine casing.
Risk of burns and crushing injuries if casing is not mounted.
Guidance on using lead-free petrol and safe filling practices.
How to check engine oil level and add oil if needed.
How to check engine oil level for Royal model and add oil.
How to check transmission oil level and add oil if needed.
Lists switches for gearbox, brake, seat, and PTO engagement.
Procedures to verify the safety system functions correctly.
Do not use if the safety system fails; seek professional inspection.
Detailed steps for starting the engine, including pre-checks and controls.
Procedure for safely stopping the engine and machine.
Caution about hot engine parts after shutdown to prevent burns.
Risk of fire due to hot converter; avoid parking near flammables.
Explains the hydraulic torque amplifier and its operating characteristics.
Ensure correct engine oil level when driving on slopes.
Be careful on slopes; avoid sudden actions; limits on slope gradient.
Reduce speed on slopes/turns to prevent tipping or loss of control.
Avoid full lock steering at high speeds to prevent toppling.
Keep hands/fingers away from steering joint; risk of crushing injuries.
Importance of following STIGA's service program for reliability and safety.
General safety preparations before service/maintenance.
Keep engine, silencer, battery, fuel tank free from debris.
Regularly check for oil and fuel leaks to prevent fire risk.
Avoid direct high-pressure water jets at transmission or engine.
Schedule and procedure for changing engine oil for specific models.
Schedule and procedure for changing engine oil for the Royal model.
Engine oil can be very hot; allow engine to cool before draining.
Procedure and schedule for replacing the engine oil filter.
Cleaning schedule for foam pre-filter and paper filter.
Cleaning schedule for Royal model's air filters.
General advice on cleaning air filters, especially for dusty conditions.
Cleaning procedure for the catalytic converter's air filter.
Schedule for cleaning or replacing spark plugs and recommended types.
Importance of cleaning the cooling system to prevent engine damage.
Information about the maintenance-free 12V battery.
Ensure battery is fully charged before first use and store charged.
Recommended battery charger use and engine charging.
Avoid short-circuiting battery terminals; risk of fire.
What to do in case of battery casing or terminal damage.
Lubricate articulated steering joint grease nipples every 25 hours.
Lubricate steering chains periodically.
Lubricate steering chains periodically, clean if very dirty.
Lubricate front wheel hubs and plastic bearings.
Transmission oil filling for Senator model, typically not topped up.
Hydrostatic transmission oil filling, typically not topped up.
How to adjust steering cables for proper steering alignment.
How to adjust steering chains for proper steering alignment.
Information on patents and design registrations for the machine.
To Next Page
