10
-
pling on the right side;
– the release in front (2.2);
(2.3);
(2.4).
4.2 MACHINE OPERATING MODES
WARNING! When working, the machine
must always be firmly held in both hands,
keeping the power unit on the right of the
body and the cutting group below the line of
the belt.
-
-
-
cated in chapter 2).
4.3 WORK TECHNIQUES
so on.
4.3.3 Cutting line head
WARNING! Use ONLY nylon lines. The
use of metal lines, plasticised metal lines
and/or lines not suitable for the head can
cause serious injuries and wounds.
During use it is advisable to stop the engine pe-
the guard.
WARNING! Do not use the machine for
sweeping, tilting the cutting line head. The
power of the engine could throw objects and
small stones 15 metres or more, causing
damage or injuries to people.
cutting line head during the operation.
-
For heavier cutting it can be useful to tilt the cut-
WARNING! Do not work in this way if
there is the possibility of causing objects to
be thrown, which could harm people, animals
or cause damage.
b) Precision cutting (Trimming)
-
er part of the cutting line head does not touch
-
-
hard.
-
-
To Next Page
Loading...
Need help?
General
