13
IMPORTANT If you are not going to use the ma-
chine for a period of more than 2-3 months, we
recommend you do a few things before putting it
away. This will make it easier when you want to
use the machine again and will also prevent per-
manent damage to the engine.
a halt, so that it uses up all the fuel that is left
in the carburettor.
-
prepare it as indicated in chapter “2. Preparing
6. EXTRAORDINARY MAINTENANCE
Dealer.
-
WARNING! If the cutting device moves
when the engine is running idle, contact your
Dealer to correctly regulate the engine.
-
6.3 SHARPENING THE SAW BLADE
WARNING! For safety reasons, sharp-
ening and balancing should be done by a
Specialised Centre with suitable skills and
equipment for the job; without risking any
damage to the blade which would make it un-
safe when used.
WARNING! The saw blade is not revers-
ible, thus it must only be used from one side.
7. DIAGNOSTICS
What to do when ...
Corrective action
Incorrect starting
procedure
(see chapter 3)
or incorrect distance
(see chapter 5)
Air filter clogged Clean and/or replace
the filter (see chapter 5)
Air filter clogged Clean and/or replace
the filter (see chapter 5)
or incorrect distance
(see chapter 5)
according to the instruc-
tions (see chapter 2)
when the engine is running idle
Incorrect carburation
regulation
To Next Page
Loading...
Need help?
General
