4
-
ground.
of the cutting device.
– do not direct the silencer and therefore the ex-
5) Do not change the engine settings or over-
speed the engine.
after pressing the throttle trigger, the engine
the blades.
10) Stop the engine:
– before refuelling;
plug cable:
-
-
-
-
branches, stones, etc.). Do not touch the
-
-
D) MAINTENANCE AND STORAGE
-
the storage area.
be done outdoors once the engine has cooled
the cutting device.
-
tenance.
-
dren!
E) TRANSPORTATION AND HANDLING
position the cutting device in the opposite di-
rection to that used during operations.
-
chine, position it so that it can cause no danger
fuel spillage.
OPERATING INSTRUCTIONS
-
ual.
IMPORTANT The machine is supplied with
some of the components disassembled and the
fuel tank empty.
WARNING! Always wear strong protec-
To Next Page
Loading...
Need help?
General
