Never use hose nozzles or harsh
detergents for cleaning the body and engine!
7.6.2 Cleaning the discharge chute (for
rear collection models only)
1.
2.
7.6.3 Cleaning the grass catcher (for
rear collection models only)
1.
2.
cuttings and soil residue
3. Replace the grass catcher and clean
the interior of the cutting device
7.6.4 Cleaning the cutting
Keep people or animals away from
the surrounding area when cleaning
the cutting device assembly.
a. Cleaning the interiors
– the grass catcher or the rear
(for rear collection models only)
– (for
models with side discharge only);
–
–
– the engine running
–
– the cutting device engaged
•
In order not to compromise
the eciency of the electromagnetic clutch:
- do not let the clutch come into contact with oil;
- do not spray pressurised water
directly on the clutch unit;
- do not clean the clutch with petrol.
b.
Do not let debris and dried grass
accumulate in the upper part of the
cutting device assembly in order
to maintain maximum machine
efficiency and safety levels.
To clean the upper part of the
•
• direct an air jet through the apertures in
7.7 NUTS AND BOLTS
•
8.
8.1
You must go to a Authorised
Service Centre or contact your Dealer
if the following are malfunctioning:
- the brake
- the cutting device engage
and disengage functions
- switching the drive to forward
or reverse gears.
8.2
8.2.1
To Next Page
Loading...
Need help?
General
