ZT 5132 T
Chapter
6 - CUTTING DECK
2017
6.2 BLADE MAINTENANCE
6.2.1 Access to the lower section of the cutting deck
NOTEAll operations described in this section can be performed without having to remove the
cutting deck from the machine.
WARNING! Engage the parking brake.
Do not exceed the angle of 25° when lifting
the front part.
6.2.2 Checking blade alignment
WARNING! - Always wear protective gloves when handling the blades.
WARNING! -The three blades are connected to each other; the rotation of each blade
engages the rotation of the other two.
6.2.3 Checking blade condition
WARNING! - Impaired blades must always
be replaced and never repaired or straightened; to
do so would cause damage or injury in the event
of breakage during use.
1
To Next Page
Loading...
Need help?
General
