Stihl BR 450 C-EF User Manual

BR 450, BR 450 C
English
16
Opening the threaded filler cap
N Turn the cap counterclockwise until
it can be removed from the tank
opening.
N Remove the filler cap.
Refueling
Take care not to spill fuel while fueling
and do not overfill the tank.
Closing the threaded filler cap
N Position cap.
N Turn the cap clockwise as far as it
will go and tighten it as securely as
possible by hand.
Positions of Master Control Lever
1 Setting lever
2 Throttle trigger
3 Starter switch (BR 450 C only)
Engine stop 0 – ignition interrupted,
engine stops. The setting lever does not
remain in ths position, it springs back.
Normal run position F – engine runs or is
ready to start. Throttle trigger can be
moved to any position.
Infinitely variable throttle setting –
throttle trigger can be locked in any
required position: Move setting lever (1)
upwards until required engine speed is
reached. To disengage, move the
setting lever back to the normal run
position F.
Starting the Engine
N Observe safety precautions.
NOTICE
Start your unit on a clean, dust-free
surface only to ensure that no dust is
sucked in.
N Move the setting lever to F
N Press the fuel pump bulb at least
eight times – even if the bulb is filled
with fuel.
002BA447 KN
002BA448 KN
Information Before You Start
1
2
3
0014BA001 AS
0416BA013 KN
2
1
Starting / Stopping the
Engine
0416BA011 KN
0009BA012 KN
H
LA
L

Stihl BR 450 C-EF Specifications

General

Brand	Stihl
Model	BR 450 C-EF
Category	Blower
Language	English